12 Watt Induction Motor

Frame size : 65 mm

Continuous Rating, TE Aluminium Body.

Rotates in Clockwise or Counter Clockwise Direction.

Capacitor Cover or Open Lead Wires for Connection.

Specifications

Model Supply Voltage Frequency
Hz
Current
A
Starting Torque
N.m
Rated Torque
N.m
Rated Speed
RPM
Capacitor
μF
3 IW 2 12 Single Phase 110 Volt 50 0.30 0.03 0.045 2400 3.0
3 IX 2 12 Single Phase 230 Volt 50 0.15 0.03 0.045 2400 1.0
3 IW 4 12 Single Phase 110 Volt 50 0.30 0.06 0.09 1200 3.0
3 IX 4 12 Single Phase 230 Volt 50 0.30 0.06 0.09 1200 1.3
3 IY 4 12 Three Phase 230 Volt 50 0.12 0.06 0.08 1350 -
3 IY 4 12 Three Phase 415 Volt 50 0.07 0.06 0.08 1350 -

Type Of Shaft, G for Gear Shaft, R for Round Shaft

Gear Motor Torque Table

The maximum permissible torque of gear motor is 4 N.m

50Hz : Two Pole Motor

Unit : N.m

RPM 1000 832 600 500 400 330 240 200 166 120 100 82 60 50 40 32 30 25 20 16
Gear Ratio 3 3.6 5 6 7.5 9 12.5 15 18 25 30 36 50 60 75 100 120 150 180
Ouptput Torque 0.1 0.12 0.18 0.21 0.27 0.32 0.45 0.54 0.65 0.8 0.96 1.1 1.3 1.5 1.9 2.3 2.6 3.1 3.9 4.0

50Hz : Four Pole Motor

Unit : N.m

RPM 500 416 300 250 200 166 120 100 83 60 50 41 30 25 20 16 15 12.5 10 8.3
Gear Ratio 3 3.6 5 6 7.5 9 12.5 15 18 25 30 36 50 60 75 100 120 150 180
Ouptput Torque 0.21 0.26 0.36 0.43 0.54 0.65 0.91 1.1 1.3 1.6 2.0 2.4 2.9 3.5 4.0 4.0 4.0 4.0 4.0 4.0

The Gear Boxes are sold Seperately.
A coloured background indicates gear shaft rotation in same direction as motor shaft.
A white background indicates gear shaft roation in opposite direction to the motor shaft.
The speed of geared motor is calculated by dividing motor's synchronous speed by gear ratio.
The actual speed of gear motor is less than the displayed value,depending upon the load.
Characteristics, specification and dimentions are subject to change without notice.

Dimensions

Gear Motor With Capacitor Cover

Round Shaft Motor with Capacitor Cover

Gear Motor with Lead Wires

Key And Keyway

Weight : Motor 1kg

Gearbox 0/5 kg

Induction Motor Wiring Diagram

Capacitor Cover Type

Capacitor is connected internally and is fitted in capacitor cover. Make a connection as shown to rotate the motor in clockwise direction.To change the direction flip CW to CCW.

Make the Connection as shown to rotate the motor in clockwise direction. To change the direction, interchange any two wires between U, V and W.

Lead Wire Single Phase Motor

Short Black Wires and connect as shown to rotate the motor in clockwise direction. To change the direction, flip CW to CCW.

Red wires are for running winding & Black wires are for starting winding. To change the direction, interchange Black wires or Red wires.

Lead Wire Three Phase Motor

To change the direction, interchange and two wires between U, V and W. For 415 Volt supply, wires are connected as shown. Short White, Black, Blue wires and insulate properly.

To change the direction, interchange any two wires between U, V and W. For 230 Volt 3 Ph supply, wires are connected as shown.

Change The direction of motor only after it stops rotating. If the attempt is made during rotation, motor may ignore the reversing command or change the direction after some time.