40 Watt Speed Control Motor

Frame size : 90 mm

Continuous Rating, Wide Speed Range, Speed Variation Through Electronic Unit, Taco Generator for Feedback.

Rotates in Clockwise or Counter Clockwise Direction.

Terminal Box or Open Lead Wires for Connection.

Specifications

Model Supply Voltage Frequency
Hz
Current
A
Starting Torque
N.m
Rated Torque N.m

1200 RPM 90 RPM
Speed Range
RPM
90 SW 4 40 Single Phase 110V 60 0.74 0.10 0.20 0.05 90-1600
90 SX 4 40 Single Phase 230V 50 0.35 0.11 0.20 0.04 90-1400

Type Of Shaft, G for Gear Shaft, R for Round Shaft

Gear Motor Torque Table

50Hz :

Unit : N.m

Ratio 3 3.6 5 6 7.5 9 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180
1200 RPM 0.43 0.52 0.72 0.86 1.08 1.29 1.62 1.94 2.33 2.80 3.49 4.20 4.19 6.29 7.87 9.44 10.4 12.5 15.6 18.8
Ouptput Torque 0.08 0.09 0.14 0.16 0.21 0.25 0.32 0.38 0.47 0.57 0.69 0.83 1.04 1.25 1.56 1.88 2.09 2.51 3.14 3.77

50Hz :

Unit : N.m

Ratio 3 3.6 5 6 7.5 9 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180
1200 RPM 0.43 0.52 0.72 0.86 1.08 1.29 1.62 1.94 2.33 2.80 3.49 4.20 4.19 6.29 7.87 9.44 10.4 12.5 15.6 18.8
Ouptput Torque 0.10 0.12 0.17 0.21 0.26 0.32 0.40 0.48 0.57 0.72 0.87 1.04 1.31 1.56 1.96 2.36 2.62 3.14 3.93 4.72

The Gear Boxes are sold Seperately. The speed of geared motor is calculated by dividing motor’s synchronous speed by the gear ratio.
The actual speed is less than the displayed value, depending upon the load.
Characteristics, specifications and dimensions are subject to change without notice.

Dimensions

Speed Control Unit

Motor, Round Shaft

Motor Gear Box

Key And Keyway

Wiring Diagram

Wiring Diagram for Single Phase Motor

In the diagram above, the motor shaft rotates in the clockwise direction. To change the direction make connection with dotted lines. Change the direction of the motor only after it stops rotating. If the attempt is made during rotation, motor may ignore the reversing command or change the direction after some time.