|
Reversible Motors |
90 Watt |
Frame Size : 90 x 90 mm |
Specifications : 30 Minute Rating, TEFC Aluminium Body |
|
|
|
| |
Model |
Output Power |
Frequency |
Supply Voltage |
Current |
Starting Torque |
Rated Torque |
Rated Speed |
Capacitor |
|
W |
Hz |
V |
A |
Kg.cm |
Kg.cm |
RPM |
μF |
90 RW4G90 |
90 |
60 |
Single phase 110 V |
1.8 |
4.5 |
5.7 |
1500 |
40 |
90 RX 4G90 |
90 |
50 |
Single phase 230 V |
0.85 |
4.5 |
6.9 |
1350 |
10 |
90 RY 4G90 |
90 |
60 |
Three phase 230 V |
0.65 |
6.9 |
5.7 |
1600 |
|
90 RY 4G90 |
90 |
50 |
Three phase 230 V |
0.65 |
7.5 |
7.0 |
1350 |
|
90 RZ 4G90 |
90 |
50 |
Three phase 415 V |
0.35 |
7.5 |
7.0 |
1350 |
|
|
| |
The Product contains a built in thermal protector. When a motor overheats for any reason, the thermal protector is opened and the motor stops.
When the motor temperature drops, the thermal protector closes and the motor restarts.
Be sure to turn the motor off before inspection. |
| |
Gearmotor Torque Table |
The permissible torque is 200 Kg.cm. |
| |
|
Unit : kg.cm |
| |
RPM |
500 |
416 |
300 |
250 |
200 |
166 |
120 |
100 |
83 |
60 |
50 |
41 |
30 |
25 |
20 |
16 |
15 |
13 |
10 |
8.3 |
Gear Ratio |
3 |
3.6 |
5 |
6 |
7.5 |
9 |
12.5 |
15 |
18 |
25 |
30 |
36 |
50 |
60 |
75 |
90 |
100 |
120 |
150 |
180 |
Output Torque |
18 |
21 |
30 |
35 |
44 |
53 |
67 |
80 |
96 |
120 |
145 |
171 |
200 |
200 |
200 |
200 |
200 |
200 |
200 |
200 |
|
|
60 Hz |
Unit : kg.cm |
|
RPM |
600 |
500 |
360 |
300 |
240 |
200 |
144 |
120 |
100 |
72 |
60 |
50 |
36 |
30 |
24 |
20 |
18 |
15 |
12 |
10 |
Gear Ratio |
3 |
3.6 |
5 |
6 |
7.5 |
9 |
12.5 |
15 |
18 |
25 |
30 |
36 |
50 |
60 |
75 |
90 |
100 |
120 |
150 |
180 |
Output Torque |
14 |
17 |
24 |
28 |
36 |
43 |
53 |
64 |
77 |
97 |
116 |
139 |
193 |
200 |
200 |
200 |
200 |
200 |
200 |
200 |
|
| |
| |
The Gearheads are sold seperately. A Coloured background indicates gear shaft rotation in the same direction; a White background indicates rotation in the opposite direction as the motor shaft.
The Speed is calculated by dividing the motor's synchronous speed ( 50 Hz: 1500RPM, 60 Hz: 1800RPM ) by the gear ratio.
The actual Speed is 2~20 % less than the displayed value, depending on the size of the load. |
|
|
|
| |
Dimensional Drawings |
| |
Dimensions
Motor, GearBox with Terminal Box
|
|
| |
|
|
| |
|
Motor Round Shaft With Terminal Box
|
|
| |
|
|
|
| |
|
Motor GearBox With Leadwires
|
|
| |
|
|
|
| |
|
|
| |
|
|
Weight |
Motor : 3 Kg. |
GearBox : 1.5 Kg. |
|
|
| |
|
Wiring Diagram for Single Phase Motors
|
|
|
|
Make the connections as shown to rotate the motor in clockwise direction
To change the direction, flip SW to CCW |
|
Short Black wires and connect as shown to rotate the motor in clockwise direction
To change the direction, flip SW to CCW |
|
Red wires are for running winding & Black wires are for starting winding
To change the direction, interchange Black wires or Red wires |
|
|
| |
Wiring Diagram for Three Phase Motors |
|
|
|
To change the direction, interchange any two wires between U, V & W For 415 Volt supply, wires are Red coloured
For 230 Volt supply, wires are White coloured |
|
Short Black wires and connect as shown to rotate the motor in clockwise direction
To change the direction, flip SW to CCW |
|
Red wires are for running winding & Black wires are for starting winding
To change the direction, interchange Black wires or Red wires |
|
|
| |
| Change the direction of the motor only after it stops rotating. If the attempt is made during rotation, motor may ignore the reversing command or change the direction after some time. |
|
| |
|
|
|
|
