Specifications : Continuous Rating, TEFC Aluminium Body
Rotates in clockwise or counter clockwise direction. Direction of rotation can be reversed Overruns for a few rotation after supply is cut off
Speeds are 2880 / 1440 RPM and further low speeds with gearbox
Terminal Box or open lead wires for connection
The Gearheads are sold seperately.
A Coloured background indicates gear shaft rotation in the same direction; a White background indicates rotation in the opposite direction as the motor shaft.
The Speed Of Geared Motor is calculated by dividing the motor's synchronous speed ( 50 Hz: 1500RPM, 60 Hz: 1800RPM ) by the gear ratio.
The actual Speed is 2~20 % less than the displayed value, depending on the size of the load.
Characteristics, specifications and dimensions are subject to change without notice.
Gearbox Model Number is 90 GB I .In place of see ratio of gearbox.
Short Black wires and connect as shown to rotate the motor in clockwise direction
To change the direction, flip SW to CCW
Red wires are for running winding & Black wires are for starting winding
To change the direction, interchange Black wires or Red wires
Wiring Diagram for Three Phase Motors
To change the direction, interchange any two wires between U, V, & W
For 415 Volt supply, wires are connected as shown. Short White, Black & Blue wire and then insulate properly
To change the direction, interchange any two wires between U, V, & W
For 230 Volt 3 Ph supply, wires are connected as shown
Change the direction of the motor only after it stops rotating. If the attempt is made during rotation, motor may ignore the reversing command or change the direction after some time.
