Induction Motors

180 watt

Frame Size : 90 x 90 mm

Specifications : Continuous Rating, TEFC Aluminium Body

Rotates in clockwise or counter clockwise direction. Direction of rotation can be reversed Overruns for a few rotation after supply is cut off
Speeds are 2880 / 1440 RPM and further low speeds with gearbox Terminal Box or open lead wires for connection

Click Here to Send Your Enquiry

Model	Output Power	Frequency	Supply Voltage	Current	Starting Torque	Rated Torque	Rated Speed	Capacitor
	W	Hz	V	A	Kg.cm	Kg.cm	RPM	μF
90 IW 2G180	180	60	Single phase 110 V	2.5	5.0	5.7	3000	18
90 IX 2G180	180	50	Single phase 230 V	1.2	6.0	6.9	2700	4
90 IY 4G180	180	60	Three phase 230 V	1.2	12.3	11.1	1600
90 IY 4G180	180	50	Three phase 230 V	1.2	15.9	15.9	1350
90 IY 4G180	180	50	Three phase 415 V	0.6	15.9	15.9	1350

Gearmotor Torque Table

The permissible torque is 200 Kg.cm.

50 Hz

Unit : kg.cm

RPM	500	416	300	250	200	166	120	100	83	60	50	41	30	25	20	16	15	13	10	8.3
Gear Ratio	3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180
Output Torque	36	42	60	70	88	106	134	160	192	200	200	200	200	200	200	200	200	200	200	200

60 Hz

Unit : kg.cm

RPM	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10
Gear Ratio	3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180
Output Torque	28	34	48	56	72	86	106	128	155	197	200	200	200	200	200	200	200	200	200	200

The Gearheads are sold seperately.
A Coloured background indicates gear shaft rotation in the same direction; a White background indicates rotation in the opposite direction as the motor shaft.
The Speed Of Geared Motor is calculated by dividing the motor's synchronous speed ( 50 Hz: 1500RPM, 60 Hz: 1800RPM ) by the gear ratio.
The actual Speed is 2~20 % less than the displayed value, depending on the size of the load.