Induction Motors |
12 watt |
Frame Size : 65 x 65 mm |
Specifications : Continuous Rating, TE Aluminium Body |
| |
Rotates in clockwise or counter clockwise direction. Direction of rotation can be reversed Overruns for a few rotation after supply is cut off
Speeds are 2880 / 1440 RPM and further low speeds with gearbox
Capacitor Cap or open lead wires for connection |
|
|
|
| |
Model |
Output Power |
Frequency |
Supply Voltage |
Current |
Starting Torque |
Rated Torque |
Rated Speed |
Capacitor |
|
W |
Hz |
V |
A |
Kg.cm |
Kg.cm |
RPM |
μF |
65 IW 2G12 |
12 |
60 |
Single phase 110 V |
0.36 |
0.3 |
0.4 |
2700 |
1.35 |
65 IX 4G12 |
12 |
50 |
Single phase 230 V |
0.15 |
0.3 |
0.5 |
1200 |
1.35 |
65 IX 2G12 |
12 |
50 |
Single phase 230 V |
0.2 |
0.3 |
0.4 |
2500 |
0.68 |
65 IY 4G12 |
12 |
50 |
Three phase 230 V |
0.25 |
0.3 |
0.4 |
1200 |
. |
65 IZ 4G12 |
12 |
50 |
Three phase 415 V |
0.12 |
0.3 |
0.4 |
1200 |
. |
|
| |
Gearmotor Torque Table :
The maximum permissible torque is 40 Kg.cm.
50 Hz :Two Pole Motor |
| |
| RPM |
1000 |
832 |
600 |
500 |
400 |
333 |
240 |
200 |
166 |
120 |
100 |
82 |
60 |
50 |
40 |
32 |
30 |
25 |
20 |
16 |
Gear Ratio |
3 |
3.6 |
5 |
6 |
7.5 |
9 |
12.5 |
15 |
18 |
25 |
30 |
36 |
50 |
60 |
75 |
90 |
100 |
120 |
150 |
180 |
Output Torque |
1.0 |
1.2 |
1.8 |
2.1 |
2.7 |
3.2 |
4.5 |
5.4 |
6.5 |
8 |
9.6 |
11 |
13 |
15 |
19 |
23 |
26 |
31.2 |
39 |
40 |
|
| |
50 Hz : Four Pole Motor |
| |
RPM |
500 |
416 |
300 |
250 |
200 |
166 |
120 |
100 |
83 |
60 |
50 |
41 |
30 |
25 |
20 |
16 |
15 |
12.5 |
10 |
8.3 |
Gear Ratio |
3 |
3.6 |
5 |
6 |
7.5 |
9 |
12.5 |
15 |
18 |
25 |
30 |
36 |
50 |
60 |
75 |
90 |
100 |
120 |
150 |
180 |
Output Torque |
1.2 |
1.4 |
2 |
2.4 |
3 |
3.6 |
5 |
6 |
7.1 |
9 |
11 |
13 |
16 |
19 |
24 |
29 |
32 |
36 |
38 |
40 |
|
| |
The Gearheads are sold seperately.
A Coloured background indicates gear shaft rotation in the same direction; a White background indicates rotation in the opposite direction as the motor shaft.
The Speed Of Geard Motor is calculated by dividing the motor's synchronous speed (50 Hz: 1500RPM, 60 Hz: 180 RPM ) by the gear ratio.
The actual Speed is 2~20 % less than the displayed value, depending on the size of the load.
Characteristics, specifications and dimensions are subject to change without notice.
|
|
|
|
|
| |
|
| |
Dimensional Drawings |
| |
Dimensions
Motor, GearBox with Capacitor Cap
|
|
| |
|
|
|
|
| |
Motor Round Shaft With Capacitor Cap
|
|
| |
|
|
|
| |
|
Motor GearBox With Leadwires
|
|
| |
|
|
|
| |
|
|
| |
|
|
Weight |
Motor : 1 Kg. |
GearBox : 0.5 Kg. |
|
|
| |
| Wiring Diagram - |
| Capacitor Cap Type |
| |
|
Single Phase Motors |
Three Phase Motors |
|
|
Capacitor is connected internally and is fitted in capacitor cap. Make the connections as shown to rotate the motor in clockwise direction.
To change the direction, flip SW to CCW |
|
Make the connections as shown to rotate the motor in clockwise direction.
To change the direction, interchange any two wire between U, V & W |
|
|
|
| |
| Lead Wires Type |
| |
Single Phase Motors |
|
|
| Short Black wires and connect as shown
to rotate the motor in clockwise direction To change the direction, flip SW to CCW |
|
Red wires are for running winding & Black wires are for starting winding
To change the direction, interchange
Black wires or Red wires |
|
|
| |
Three Phase Motors |
|
|
| To change the direction, interchange
any two wires between U, V & W
For 415 Volt supply, wires are connected as shown. Short White, Black & Blue wire and
then insulate properly. |
|
To change the direction, interchange any two wires between U, V & W.
For 230 Volt 3 Ph supply, wires are connected
as shown. |
|
|
| |
| Change the direction of the motor only after it stops rotating. If the attempt is made during rotation, motor may ignore the reversing command or change the direction after some time. |
|
| |
|
| |
|
|
|
| |
|
